How to Check a Product's CE Certificate

How to check a CE certificate: verify the mark, the declaration of conformity and the notified body in NANDO, and what to do if in doubt.
A supplier from China sends a PDF headed "CE Certificate", and the product carries a CE mark. Is that enough to sell it in Poland? Before you answer, you need to establish what you actually received. The question "how to check a CE certificate" sounds simple, but behind the phrase are four different things: the marking on the product, the declaration of conformity, a notified body certificate and a test report. This article shows how to check each of them and what to do when something does not add up.
Key points at a glance
- Nobody "grants" you the CE mark. It is affixed by the manufacturer or its authorised representative (Art. 30(1) of Regulation 765/2008).
- "CE certificate" is a colloquial name. It can mean the manufacturer's declaration of conformity, a notified body certificate or an ordinary laboratory report. Each proves something different.
- You can check a notified body in the European Commission's list (NANDO): number, name and scope of notification.
- The CE mark may only be affixed to products for which specific legislation provides for it (Art. 30(2)). Its absence is not always an error, while its presence on the wrong product is.
- Checking documents is not testing the product. If doubts remain, do not place the goods on the market.
CE certificate: how to check what you actually have
The confusion arises because sellers and intermediaries use one word for different documents. The distinction is covered more broadly in Declaration of Conformity vs CE Certificate; here is a short version for practical verification.
| Element | Who creates it | What it proves |
|---|---|---|
| CE mark on the product | manufacturer or authorised representative | that the manufacturer takes responsibility for conformity with the rules (Art. 30(3)) |
| EU declaration of conformity | manufacturer | that the product meets the legal acts listed |
| Notified body certificate | a body from the Commission's list, only where the legislation requires it | that the body assessed the product or quality system within its scope of notification |
| Test report | laboratory | that a sample was tested using a specific method; it is not a CE certificate |
The European Commission's page on CE marking confirms this division of roles: the manufacturer carries out the conformity assessment, draws up the technical documentation, issues the EU declaration of conformity and affixes the CE mark. A notified body appears only where the legislation requires third-party involvement.
What a correct CE mark looks like
The mark consists of the letters "CE" in the form shown in Annex II to Regulation 765/2008. When the size is changed, the proportions of the drawing are kept, and if specific legislation sets no size, the mark is at least 5 mm high. The model provisions of Decision 768/2008/EC add that the mark is affixed so that it is visible, legible and indelible on the product or its data plate, and where that is not possible, on the packaging and in accompanying documents (Art. R12(1)). The mark must be on the product before it is placed on the market (Art. R12(2)).
Decision 768/2008/EC is a set of model provisions that the legislator carries into sector-specific acts. Read the exact requirements for your product in the specific directive or regulation. We did not check them for all categories.
Two practical conclusions. First, do not judge the mark "by eye". Compare it with the model in Annex II and check legibility. Second, it is prohibited to affix marks that could mislead by resembling CE (Art. 30(5)). How to tell CE from similar marks from China is discussed in Importing From China: How to Check CE.
How to check a notified body in NANDO
If a number stands next to the CE mark, it usually means a notified body was involved at the production control stage (Art. R12(3) of Decision 768/2008/EC). In that case:
- Copy the number from the mark or the document.
- Go to the Commission's list of notified bodies (the Commission's page on notified bodies leads to the NANDO database).
- Find the body by number and compare its name with the one on the certificate.
- Check the scope: whether the body is notified for the legal act and tasks that concern your product.
According to the Commission, the list contains each body's identification number and the tasks for which it has been notified. A company that is not listed there is not a notified body, however official its certificate looks. We did not test the current interface of the database, so we describe steps 2-4 based on information from the Commission's page.
How to check a declaration of conformity
The model declaration in Annex III to Decision 768/2008/EC has several fixed points. Compare the supplier's document against them:
- a number or unique identifier,
- the name and address of the manufacturer or its authorised representative,
- a statement that the declaration is issued under the sole responsibility of the manufacturer,
- the object of the declaration: product identification and, if needed, an image,
- the legal acts with which the product complies,
- references to the harmonised standards used,
- where applicable, the name and number of the notified body and the certificate issued,
- place and date of issue, name, function and signature.
This is a model. Sector-specific legislation may add its own requirements, and the declaration should be translated into the language required by the country in which the product is made available (Art. R10(2)). The layout and completion of the declaration are covered in CE Declaration of Conformity: Template.
Test report: does it cover your model
A laboratory report is sometimes sent as a "certificate". Check whether it describes exactly the model you are buying (name, number, photo), whether it has a date and the laboratory's name, and whether it states the test method. A report for another variant of the product proves nothing about yours. More on materials from a Chinese manufacturer can be found in GPSR Documents From a Chinese Manufacturer.
Warning signs
- A declaration with no signature, date or manufacturer's address.
- The document names a different model, or a product from a different category, than the one you hold.
- The legal acts listed do not fit the product.
- The body's number is not in NANDO, or its scope does not cover the act in question.
- A "CE certificate" issued by a company that is not on the list of notified bodies, presented as a notified body certificate.
- A CE mark of unusual shape or blurred, placed only on the packaging for a product that can carry the marking itself.
- The same file attached to several different products.
What to do when a document raises doubts
The model importer obligations in Decision 768/2008/EC (Art. R4(2)) are clear: before placing a product on the market, the importer ensures that the manufacturer has carried out the conformity assessment, drawn up the technical documentation, affixed the required marking and supplied the documents. If the importer considers or has reason to believe that the product is not in conformity, it must not place it on the market until conformity is ensured, and where the product presents a risk, it informs the manufacturer and the surveillance authorities. For products outside sector-specific legislation, similar rules are set out in Art. 11 GPSR.
In practice:
- Ask the supplier in writing about the missing elements and request correct documents.
- Hold the sale of any batch whose documents you cannot justify.
- Consider testing a sample in a laboratory if the risk is significant.
- Check the Safety Gate database to see whether similar products have been the subject of alerts.
- Record what you checked and when. This is evidence of due diligence, not a guarantee of conformity.
The importer's role and its legal consequences are explained in Importer as Manufacturer: When GPSR Duties Transfer, and the CE and GPSR frameworks are put in order in GPSR vs CE Marking: Differences and What You Need.
Frequently asked questions
Who grants a CE certificate?
No authority grants the CE mark. It is affixed by the manufacturer or its authorised representative (Art. 30(1) of Regulation 765/2008). A certificate is issued by a notified body, but only where the rules for the given product require its involvement. We write more about the route to CE in What Is a CE Certificate and How to Get It.
What does a CE certificate look like?
There is no single template. A declaration of conformity follows the model layout from Decision 768/2008/EC, and a notified body certificate looks different at each body. Instead of looking for a "typical appearance", check the content: who issued it, what it covers, which legal act it names.
Can CE be checked in a single product register?
We did not find an EU-wide register of products with CE marking. You can check a notified body in NANDO and alerts in Safety Gate, but the conformity of a specific product rests on the manufacturer's documents.
Is a product without CE illegal?
Not always. CE is affixed only to products covered by rules that provide for it (Art. 30(2)). A product without CE that is subject to such a rule does not meet the requirements. A product outside such rules falls under GPSR in general.
Is a scan from the supplier enough?
A scan is a starting point. The importer must ensure that the documents exist and relate to the product, so compare them with the model, the product and the NANDO list. Keep copies together with the technical documentation.
Legal status as of: 2 November 2026
Legal basis: Regulation (EC) No 765/2008 (Art. 30(1)-(3) and (5), Annex II; consolidated text of 16 July 2021); Decision No 768/2008/EC (Annex I Arts. R4, R10, R12; Annex III); Regulation (EU) 2023/988 (Art. 11); European Commission information on CE marking and notified bodies (pages checked on 2 November 2026). We did not check sector-specific acts for individual product categories, the current interface of the NANDO database, or the Blue Guide. This text is not legal advice.
Last review: 2 November 2026
Order in your supplier documents
The Tarcza package from GPSRReady (PLN 590) includes, among other things, manufacturer identification (M6), a declaration of conformity and marking (M5) and an "inspector-proof" checklist (M7). It helps you collect and describe documents in one place, but it does not verify them for you and does not guarantee the outcome of an inspection.