Skip to content
GPSR Basics

What Is a CE Certificate and How to Get It

Author:

CE certificate: what it is, how it differs from the CE mark and the route to marking. When a notified body is needed and which products are covered.

You hear the phrase "CE certificate" from suppliers, buyers and in comments under listings. It sounds like a single document you can order, pay for and hang on the wall. In fact, what a CE certificate is depends on whom you ask. The law speaks of CE marking, of the declaration of conformity, and of a certificate only where a notified body carries out the assessment. For an importer from China this difference has consequences: it determines what you can demand from a supplier and what you are responsible for yourself.

This article explains what the CE mark is, when a "certificate" exists at all, what the route to marking looks like and how to obtain a CE certificate in the sense the law actually provides for.

Key points at a glance

  • CE is a marking by which the manufacturer declares that the product complies with EU rules. It is not a document issued by an authority.
  • According to the Your Europe portal, there is no central EU body that issues permits or certificates entitling you to use the CE mark.
  • The mark may be affixed only by the manufacturer or its authorised representative (Art. 30(1) of Regulation 765/2008), and only on products for which specific EU rules provide for it (Art. 30(2)).
  • A certificate is issued by a notified body, but only where the rules require its involvement. For many products the manufacturer assesses conformity on its own.
  • Affixing the CE mark itself is not subject to a fee. You pay for the conformity assessment, and its cost depends on the product and the procedure.

CE certificate: what it is, and what CE marking is

The European Commission describes the CE mark as a symbol meaning that a product sold in the European Economic Area meets safety, health and environmental protection requirements. By affixing the mark, the manufacturer declares compliance with all applicable requirements. This also applies to products made outside the EU (Commission page on CE marking).

Polish and EU law use two separate concepts. A declaration of conformity is a statement by the manufacturer. A certificate is a document issued by a notified body, confirming that a product, its design or its manufacturing process complies with the requirements (Art. 4 point 4 of the Polish act on conformity assessment systems and market surveillance). In everyday language, "CE certificate" blends both of these concepts and the mark. The difference between the documents is covered in Declaration of Conformity vs CE Certificate.

When a notified body is needed

A notified body is an independent organisation authorised by an EU country to assess the conformity of products where the rules require it. Which products need one is decided by the sector act and by the route the manufacturer has chosen.

  • Low voltage electrical equipment: the assessment is based on internal production control (module A), without a notified body (Art. 15(2) and Annex III of Directive 2014/35/EU).
  • Toys: module A, if the manufacturer applied harmonised standards covering all the requirements. Type examination by a notified body is necessary, among other cases, when there are no such standards or the manufacturer applied them only in part (Art. 19 of Directive 2009/48/EC).
  • Radio equipment: where the manufacturer did not apply harmonised standards or applied them in part, it must choose a procedure involving a notified body (Art. 17(4) of Directive 2014/53/EU).
  • Machinery, construction products, medical devices: Your Europe lists them as examples of high-risk products for which third-party assessment is usually necessary.

If a notified body takes part in the assessment, its four-digit identification number is placed next to the CE mark, and its details go into the declaration. The Commission keeps the list of notified bodies in the NANDO database, linked on the page on notified bodies.

How to obtain a CE certificate: the route to marking

As an importer you usually do not go through this route yourself, because the tasks rest with the manufacturer. It is worth knowing it, because then you know what to ask about. According to the Your Europe portal and the act, the sequence is as follows:

  1. Identifying the rules. The manufacturer identifies all EU acts that cover the product. A lamp with a power supply may fall under several acts at once.
  2. Choosing the procedure. It checks in those acts whether it may assess conformity on its own or needs a notified body.
  3. Technical documentation and testing. The manufacturer gathers evidence of compliance. Decision 768/2008/EC lists among the elements, for example, a product description, a list of the standards applied, results of calculations and tests, and test reports.
  4. EU declaration of conformity. The manufacturer draws it up and signs it, thereby taking responsibility for the product's compliance.
  5. Affixing the CE mark. After the assessment and confirmation of compliance, and before placing on the market (Art. 6 of the act).

Applying harmonised standards, whose references have been published in the Official Journal of the EU, gives a presumption of conformity with the requirements they cover (Art. R8 of Decision 768/2008/EC). That is not a free pass, only an evidential convenience.

The importer is left with verifying the outcome: it must ensure that the manufacturer carried out the assessment, drew up the documentation, marked the product with the CE mark and enclosed the required documents (Art. 16 point 2 of the act). How to check this in practice is described in Importing From China: How to Check CE.

Which products the CE certificate and mark apply to

CE applies only to products covered by harmonisation legislation that provides for it. Your Europe lists, as examples: toys, drones, electrical and electronic equipment, pyrotechnic articles, recreational craft, some pressure equipment, gas appliances, batteries and machinery, weighing and measuring instruments, personal protective equipment and medical equipment. The CE mark must not be placed on products outside those rules.

For an Allegro importer this most often means two groups. Electronics (chargers, lamps, speakers) usually fall under several acts, as discussed in GPSR for Electronics: CE and RoHS. Toys have their own, stricter requirements described in GPSR for Toys. Textiles and some accessories and home furnishings do not have CE, yet they are still subject to Regulation 2023/988. The distinction between the two regimes is explained in GPSR vs CE.

It is also worth knowing about changes. Regulation 2023/1230 on machinery applies from 14 January 2027 (Art. 54), and Regulation 2025/2509 on toy safety from 1 August 2030 (Art. 59). Until those dates the existing directives apply.

Costs and time: what you can safely say

There is no single answer to this question and we do not give ranges. Your Europe notes that the manufacturer bears the costs of conformity assessment, that affixing the mark itself is not subject to a fee, and that the cost depends on the complexity of the product and the procedure. With module A the costs are testing and work on the documentation; with type examination a notified body is added. The act provides that fees are charged for mandatory conformity assessment activities performed by notified bodies (Art. 8(3)), but we did not check their amounts.

We do not promise a timeframe either. It depends on the category, the number of variants and whether the tests have to be repeated.

What the mark looks like and what is not allowed

Annex II to Regulation 765/2008 presents the mark as the letters "CE" in a defined form, with fixed proportions when resized, and if the specific rules set no size, the height of the mark is at least 5 mm. The mark must be visible, legible and indelible. Affixing to the product any marks that may mislead by association with CE or similarity of form is prohibited (Art. 30(5)). The absence of the CE mark on a product that requires it carries a fine of up to PLN 20,000 (Art. 89(1) of the act).

Frequently asked questions

Is a CE certificate mandatory?

What is mandatory is compliance with the rules, and for products covered by harmonisation legislation also the CE mark and a declaration of conformity. A notified body certificate is required only where the legal act provides for its involvement.

How do I obtain a CE certificate for my product?

If you are the manufacturer (including a seller under your own brand), you go through the route described above: rules, procedure, documentation, declaration, mark. If the act requires a notified body, you choose one from the NANDO database and commission the assessment. If you import someone else's product, you demand these documents from the manufacturer.

Can a CE certificate be bought online?

There is no document entitling you to the CE mark that you buy from an intermediary. Your Europe warns against "voluntary certificates", which are not legally recognised and may be issued without testing the product.

Does the CE mark have an expiry date?

The mark attests compliance at the time of placing on the market. The declaration and documentation must be kept up to date and retained for at least 10 years from placing the product on the market (Your Europe; Art. 13 point 6 of the act).

Can an importer affix the CE mark itself?

The mark is affixed by the manufacturer or its authorised representative (Art. 30(1) of Regulation 765/2008). If you sell the product under your own brand, you are considered the manufacturer, so the obligations fall on you. We describe this in Importer as Manufacturer Under GPSR.


Legal status as of: 2 November 2026
Legal basis: Regulation (EC) No 765/2008 (Art. 30 and Annex II; as amended by Regulation (EU) 2019/1020); Decision No 768/2008/EC (Art. R8, Annex II module A); Polish act of 13 April 2016 on conformity assessment systems and market surveillance (consolidated text: Dz.U. 2025 item 568; Art. 4 point 4, Art. 6, Art. 8(3), Art. 13 point 6, Art. 16 point 2, Art. 89(1)); Directive 2014/35/EU (Art. 15, Annex III); Directive 2009/48/EC (Art. 19); Directive 2014/53/EU (Art. 17(4)); Regulation (EU) 2023/1230 (Art. 54); Regulation (EU) 2025/2509 (Art. 59); European Commission pages on CE marking and notified bodies and the Your Europe portal (page last checked on 17 July 2026). We did not check the price lists of notified bodies, the procedures in the other sector acts, the Blue Guide, or later amendments to the act after the consolidated text announced on 24 March 2025. This text is not legal advice.
Last review: 2 November 2026

Not sure whether GPSR and CE apply to your range?

The Polish-language page "Czy GPSR Cię dotyczy" ("Does GPSR apply to you") offers a short guide to help you establish your role. When you organise your documents, the Fundament package (from 390 zł) gives you a template for technical documentation and manufacturer identification, and Tarcza adds the declaration and marking module. These are supporting templates: they do not replace the manufacturer's conformity assessment and do not guarantee the outcome of an inspection.

See GPSRReady packages

Newsletter

Alerts about regulation and Allegro form changes - once in a while.