Skip to content
Importing from China

Importing From China: How to Check CE

Author:

CE certificate when importing from China: who is responsible for what, which documents to demand from the supplier and how to check them. An importer checklist.

You are ordering a batch of lamps, chargers or toys from a factory in Shenzhen. The supplier assures you: "All products have CE". There is a logo in the photos and a PDF in your inbox. The question to ask before you pay is: what exactly did this supplier send you, and is it enough? A CE certificate when importing from China is not something you buy together with the goods. It is a set of documents and markings for which you are responsible as the importer.

This article is a practical buying guide: what to demand before ordering, how to check what you receive, and what to do when documents are missing. The general background on the terms (declaration vs certificate) is in Declaration of Conformity vs CE Certificate.

Key points at a glance

  • If you bring a product from outside the EU and make it available on the market, you are an importer (Art. 4 point 9 of the Polish act on conformity assessment systems and market surveillance).
  • The importer must ensure that the manufacturer has drawn up the technical documentation, carried out the conformity assessment, issued the declaration and affixed the CE mark (Art. 16 point 2 of the act).
  • The CE mark may be affixed only by the manufacturer or its authorised representative. An intermediary supplier, or you (for another brand's product), cannot "grant" it.
  • If you have a reasonable doubt about the product's compliance, you do not place it on the market (Art. 16 point 3).
  • If you sell under your own brand, you become the manufacturer and you must go through the entire procedure.

CE certificate when importing from China: who is responsible for what

The act imposes specific obligations on the importer. It must place on the market only a product that complies with the requirements, ensure that the manufacturer has the technical documentation, carried out the conformity assessment and issued the declaration and marked the product, put its own name and address on the product in Polish, provide instructions and safety information in Polish, keep a copy of the declaration for 10 years and ensure access to the technical documentation (Art. 16 points 1, 2, 4-6).

For some products Regulation 2019/1020 applies in addition. Its Art. 4 requires an economic operator in the EU to be responsible for checking that the declaration and documentation exist. Where the manufacturer is not established in the Union, that operator is the importer (Art. 4(2)(b)). The article covers, among others, products under Directives 2014/35/EU, 2014/30/EU, 2014/53/EU, 2009/48/EC and 2011/65/EU.

GPSR works separately: the importer is responsible for ensuring that the product meets the general safety requirement and that the manufacturer has the documentation required by Art. 9(2), and the importer keeps a copy of the documentation for 10 years (Art. 11(1) and (6) of Regulation 2023/988). More on this role in Importing From China Under GPSR: Importer Duties.

Can a Chinese supplier "grant" CE

No. There is no procedure in the EU in which someone "grants" the CE mark. According to the Your Europe portal, there is no central body issuing permits or certificates entitling you to use the mark. The manufacturer affixes it itself after carrying out the assessment, and Regulation 765/2008 says that only the manufacturer or its authorised representative does so (Art. 30(1)). By affixing the mark, the manufacturer assumes responsibility for compliance with all applicable requirements (Art. 30(3)).

This means three situations when buying:

  • You buy from the factory that is the manufacturer. The factory should issue the declaration in its own name and hold the technical documentation.
  • You buy from an intermediary (a trading company). The intermediary is not the manufacturer. Ask for the details and documents of the real manufacturer, or for the authorisation under which it acts.
  • You order a product under your own brand (OEM, private label). You are considered the manufacturer when you place the product on the market under your own name or trademark (e.g. Art. 10 of Directive 2014/35/EU). The conformity assessment and the declaration fall on you. Details in Importer as Manufacturer Under GPSR.

"CE" and "China Export": what the law says

A story circulates about a "China Export" mark that resembles CE. We did not find a definition of such a mark in the official sources we checked, so we do not rely on it in this text. We rely on the rule instead. Regulation 765/2008 prohibits affixing to a product marks, signs and inscriptions that may mislead third parties by association with CE or similarity of form (Art. 30(5)). Annex II sets out the form of the genuine mark: the letters "CE" with preserved proportions and a height of at least 5 mm, unless the specific rules provide otherwise.

The practical conclusion: looking at the logo proves nothing. A mark can look correct and be unfounded, or it can be reproduced imprecisely although the manufacturer has full documentation behind it. What counts is the documentation behind it. More on certificates from Chinese suppliers in Chinese Certificates and GPSR.

Importing from China: documents to demand before buying

Ask for the full set before placing the order, ideally writing it into the order terms. A checklist:

  1. An EU declaration of conformity for exactly this model, with the manufacturer's details, a reference to the legal acts and standards, a date and the signature of a person with name and position.
  2. Information on who the manufacturer is, and confirmation if the supplier is an intermediary.
  3. Test reports with the laboratory name, number and date, for this model.
  4. If a notified body took part in the assessment: its name, four-digit number and certificate number.
  5. Photos of the CE mark on the product and packaging, and of the label with the manufacturer's details and the batch or type number.
  6. Instructions and warnings, preferably in a version that can be translated into Polish.

How to word the message to the factory and which materials are realistically attainable is covered in Documentation From a Chinese Manufacturer.

How to verify the documents you receive

What you checkHow to do it
Whether it is a declaration, not just a "CE certificate"Look for the fields: manufacturer, product identification, legal acts, standards, signature, date
Whether it applies to your modelCompare the name, model and type number with the order and the label on the product
Whether the legal acts fit the productCheck on the Commission page on CE marking which acts cover the given category
Whether the acts are currentWatch for rules being replaced by new ones, e.g. Regulation 2023/1230 on machinery (applicable from 14 January 2027)
Whether the notified body existsFind it in the NANDO database via the Commission page on notified bodies; check that it is notified for the relevant act
Whether the report comes from a real laboratoryAsk the issuer to confirm the report number
Whether the mark on the product is correctCompare with the model in Annex II to Regulation 765/2008: letter proportions, height of at least 5 mm

The documents require your assessment, but you do not take over the verification that a notified body carries out within its own procedure. A broader discussion of checking certificates is in How to Check a Product's CE Certificate.

What to do when documents are missing

The rule is simple and follows from the act: an importer does not place on the market a product about which there is a reasonable doubt as to whether it meets the requirements (Art. 16 point 3). In practice you have several options:

  • Ask and complete. Send a specific list of gaps and set a deadline for a reply. No response is information about the supplier.
  • Change supplier. A factory that has no documentation for a product sold on the EU market shifts the risk to you.
  • Commission testing or prepare the documentation yourself. For a product under your own brand this is your duty. For someone else's brand your options are limited, because the declaration is issued by the manufacturer.
  • Do not sell until it is clarified. The consequences can be costlier than the delay.

The act provides for fines (upper limits): up to PLN 100,000 for placing a non-compliant product on the market (Art. 88(1)) and up to PLN 20,000 for the absence of the CE mark on a product that requires it (Art. 89(1)). An importer that does not keep a copy of the declaration or does not ensure access to the documentation faces a fine of up to PLN 10,000 (Art. 93(1)). Where the authority's opinion indicates a serious risk during a customs inspection, the importer is a party to the proceedings on destroying the product and bears the costs of storage and destruction (Art. 87(4) and (7)). The course of an inspection is described in Market Surveillance Inspections Under GPSR.

Frequently asked questions

Does a CE mark on a product from China mean it is lawful under EU law?

Not by itself. The mark is a statement by the manufacturer, and a conformity assessment, technical documentation and a declaration must stand behind it. The act provides for a presumption of conformity of a product bearing the CE mark with the documentation (Art. 9), but as an importer you are responsible for checking that this documentation exists.

Can I sell the product if the supplier did not send a declaration?

If the product requires a declaration and you do not have it, you have reason to doubt its compliance. In that case you do not place it on the market until you complete the documents (Art. 16 point 3 of the act).

Is a laboratory certificate (e.g. SGS, TÜV) enough?

It replaces neither the declaration nor the technical documentation. It is test evidence that goes into the documentation. Check that it applies to your model and to the scope of requirements.

Is a product without the CE mark illegal?

Not always. The CE mark is required only for products covered by rules that provide for it. It must not be placed on others, and the general safety rules of Regulation 2023/988 apply.

Can I affix CE myself to a product from a Chinese supplier?

Not as an ordinary importer. The mark is affixed by the manufacturer or its authorised representative. If you place the product on the market under your own brand, you are the manufacturer and you go through the conformity assessment procedure.


Legal status as of: 2 November 2026
Legal basis: Polish act of 13 April 2016 on conformity assessment systems and market surveillance (consolidated text: Dz.U. 2025 item 568; Art. 4 point 9, Art. 9, Art. 16, Art. 87(4) and (7), Art. 88(1), Art. 89(1), Art. 93(1)); Regulation (EC) No 765/2008 (Art. 30 and Annex II; as amended by Regulation (EU) 2019/1020); Regulation (EU) 2019/1020 (Art. 4(1)-(3) and (5)); Regulation (EU) 2023/988 (Art. 11(1) and (6)); Directive 2014/35/EU (Art. 10); Regulation (EU) 2023/1230 (Art. 54); European Commission pages on CE marking and notified bodies and the Your Europe portal (last checked: 17 July 2026). We did not check the responses of the European Commission and the European Parliament concerning the "China Export" mark (the Parliament's pages were unavailable), the content of the NANDO database for specific bodies, the Blue Guide, customs rules, or the specific rules for particular product categories. This text is not legal advice.
Last review: 2 November 2026

Putting your supplier's documents in order?

Module M6 "Manufacturer identification" in GPSRReady helps you establish who is the manufacturer and who is an intermediary, and organise the data for the documentation. The Tarcza (from 590 zł) and Premium packages add a declaration and marking module and a control checklist (M5, M7). These are supporting templates: they do not verify your supplier's documents and do not guarantee the outcome of an inspection.

See GPSRReady packages

Newsletter

Alerts about regulation and Allegro form changes - once in a while.