Skip to content
Technical Documentation & Risk Assessment

CE Declaration of Conformity: Template

Author:

CE declaration of conformity: who issues it, when it is required and which fields the template contains. A practical guide for importers.

You search for "CE declaration of conformity template" and land on a dozen files, each looking different. That is no accident. A declaration of conformity has one general layout, but the specific fields and references depend on the legal act covering your product. For an importer from China this has a practical consequence: the supplier sends you a PDF, and you have to be able to tell whether it is a real declaration of conformity or just a sheet of paper with a CE logo.

This article shows what a CE declaration of conformity is, when it is required, which elements it contains and what the field layout looks like, so you can use it as a checklist. We do not provide a ready-made document to sign, because without the right legal acts named it would be worthless.

Key points at a glance

  • The EU declaration of conformity (informally the "CE declaration") is a statement by the manufacturer, made under its sole responsibility, that the product meets the requirements of EU law (Art. 4 point 6 of the Polish act on conformity assessment systems and market surveillance).
  • It is required only for products covered by EU harmonisation legislation. The CE mark must not be placed on a product outside those rules (Art. 30(2) of Regulation 765/2008).
  • The field layout comes from Annex III to Decision 768/2008/EC, and the sector-specific acts (e.g. Directive 2014/35/EU, Directive 2009/48/EC) have their own annexes with a model.
  • If the declaration is in another language, the entity making the product available on the Polish market translates it into Polish (Art. 11(2) of the act).
  • The manufacturer and the importer keep the declaration (the importer - a copy of it) for 10 years from placing the product on the market.

What a CE declaration of conformity is and who issues it

The act defines a declaration of conformity as a statement by the manufacturer, installer or their authorised representative, or a private importer, made under their sole responsibility, that the product complies with the requirements (Art. 4 point 6). The Low Voltage Directive says the same from the manufacturer's side: by drawing up the declaration, the manufacturer assumes responsibility for the equipment's compliance with the directive (Art. 15(4) of Directive 2014/35/EU).

So it is issued by the manufacturer. Not by a seller, a trading intermediary or a laboratory. Issuing the declaration is the last step of the procedure: the manufacturer draws up the technical documentation, carries out the conformity assessment, and only then signs the declaration and affixes the CE mark (Art. 6(2) of Directive 2014/35/EU; Art. 13 of the act). A declaration without technical documentation behind it is only a statement on paper.

When a declaration is required and when it is not

The CE mark and the declaration apply only to products for which specific EU rules provide for them. The Your Europe portal lists, as examples, toys, drones, electrical and electronic equipment, some machinery, pressure equipment and batteries, personal protective equipment and medical devices. For the full list of acts, see the European Commission page on CE marking.

Products outside this list, for example ordinary textiles or some home furnishings, have no CE declaration. They are subject to the general product safety rules, i.e. Regulation 2023/988 (GPSR). Which of your products fall into which group is described in GPSR vs CE Marking - What Is the Difference. Regulation 2023/988 applies to products covered by harmonisation legislation only as regards risks that this legislation does not cover (Art. 2(1)), so it neither replaces the declaration nor requires it.

Elements of the declaration step by step

Start by establishing which acts apply to the product. An LED lamp with a power supply may fall under several acts at once. The act then requires a single declaration that lists all of them together with the place of their publication (Art. 11(1)). Then go through the elements in order:

  1. Product identification. Model, type, batch or serial number. The layout from Directive 2014/35/EU also allows a photo, where the product is hard to identify without one.
  2. Manufacturer. Name and address of the manufacturer or its authorised representative.
  3. Statement of responsibility. A declaration issued under the sole responsibility of the manufacturer.
  4. Legal acts. A reference to the harmonisation legislation with which the product complies.
  5. Standards or specifications. References to the harmonised standards or other technical specifications applied.
  6. Notified body. Only if it took part in the conformity assessment: name, number, type of involvement and the certificate issued.
  7. Additional information, place and date of issue, signature with the name and position of the person signing.

Declaration template: fields to complete

The table below reproduces the layout from Annex III to Decision 768/2008/EC. The decision is a model for the legislator who writes the sector acts, so what is binding is the wording of the act for your product (e.g. Annex IV to Directive 2014/35/EU has seven fields, and Annex III to Directive 2009/48/EC adds a requirement for a clear colour photo of the toy). Treat the table as a checklist, not as a document to sign.

FieldWhat you enterWhat to watch for
1. Declaration numberA unique identifierUnder Directive 2014/35/EU the number is not mandatory
2. ManufacturerName and address of the manufacturer or its authorised representativeNot your intermediary supplier, but the actual manufacturer
3. ResponsibilityA statement of the manufacturer's sole responsibilityA missing statement suggests the document was copied from someone else's template
4. ObjectProduct identification that allows its history to be tracedIt should match the model you sell, not a "similar" one
5. Legal actsHarmonisation legislation with which the product compliesFull references to the acts, including the publication reference
6. StandardsReferences to the standards or specifications appliedTake them from the technical documentation, not from someone else's declarations
7. Notified bodyName, number, involvement, certificate - if applicableIf there was no body, state that it is not applicable
8. Additional informationPlace and date of issue, name, position, signatureWithout a signature and date the declaration is incomplete

The layout and content must be kept up to date. The act requires the declaration to reflect the current legal and factual situation (Art. 11(3)). If you change the product or a rule changes, the declaration needs a review.

Most common mistakes in supplier declarations

  • No legal acts. The declaration says only "compliant with EU directives" or "CE". It is unclear what the product is supposed to comply with.
  • Wrong or missing act. For electronic equipment the declaration mentions one act, while the product falls under several. The act requires a single declaration for all applicable acts.
  • No signature, date or named person. Files from factories often carry a stamp but not the name and position of the person signing.
  • Different model. The declaration describes a variant that is not what you are ordering. A declaration does not carry over to a similar product "as a favour".
  • The issuer is a seller. The manufacturer field shows a trading company rather than the maker.
  • No Polish version. If the declaration is in another language, translating it into Polish is the responsibility of whoever makes the product available on the Polish market.
  • Outdated act. The document relies on a rule that has been replaced by a new one. For example, Regulation 2023/1230 on machinery applies from 14 January 2027, and Regulation 2025/2509 on toy safety from 1 August 2030, after which the earlier directives cease to be the basis.

Who issues the declaration when you import from China

By default, not you. Under the act, the importer must ensure that the manufacturer has met its obligations: drawn up the technical documentation, carried out the conformity assessment, drawn up the declaration and affixed the CE mark (Art. 16 point 2 in conjunction with Art. 13 points 2-4). In addition, the importer keeps a copy of the declaration for 10 years, ensures access to the technical documentation and, on request, provides documents in Polish to the authority (Art. 16 points 6 and 13). Directive 2014/35/EU imposes exactly the same on the importer (Art. 8(2) and (8)).

There is one important exception. The importer is considered the manufacturer if it places the product on the market under its own name or trademark, or modifies it in a way that may affect compliance (Art. 10 of Directive 2014/35/EU). In that case you bear the manufacturer's obligations, including the technical documentation and the declaration. The consequences of this change of role are covered in Importer as Manufacturer Under GPSR.

For some products an additional rule applies: Regulation 2019/1020 (Art. 4) requires an economic operator in the EU to be responsible for checking that the declaration and documentation exist, and for keeping the declaration. This covers, among others, products under Directives 2014/35/EU, 2014/30/EU, 2014/53/EU, 2009/48/EC and 2011/65/EU. Where the manufacturer is not established in the Union, this role falls to the importer.

How to check the supplier's documents before you place an order is described in Importing From China: How to Check CE. How a declaration differs from a "certificate" is explained in Declaration of Conformity vs CE Certificate.

What you risk for gaps in the declaration

The act provides for administrative fines, whose amounts are upper limits, not fixed sums. A manufacturer that fails to draw up the declaration in line with the requirements, or fails to keep it, faces a fine of up to PLN 10,000 (Art. 92(1)). An importer that fails to keep a copy of the declaration or to ensure access to the documentation also faces up to PLN 10,000 (Art. 93(1)). For placing a non-compliant product on the market the fine reaches PLN 100,000 (Art. 88(1)). The authority takes into account, among other things, the seriousness of the infringement and the number of products (Art. 97(3)). For the wider background to inspections, see Market Surveillance Inspections Under GPSR.

Frequently asked questions

Is a CE declaration of conformity mandatory for every product?

No. It is required for products covered by EU harmonisation legislation that provides for such a declaration and the CE mark. Other products are subject to the general safety rules of Regulation 2023/988, and the CE mark must not be placed on them.

Can I issue the declaration myself on behalf of a Chinese manufacturer?

Not as an ordinary importer. The declaration is issued by the manufacturer or its authorised representative. The importer checks that it exists and is complete. However, if you sell the product under your own brand, you are considered the manufacturer and the declaration is your responsibility.

In what language should the declaration be?

If it was drawn up in another language, the entity that made the product available on the Polish market translates it into Polish (Art. 11(2) of the act). The sector acts require translation into the language required by the country where the product is made available.

Must the declaration accompany the product?

That depends on the legal act for the given category. The act speaks of enclosing a copy of the declaration "where required" (Art. 13 point 9, Art. 16 point 5). We have not checked this for every category, so consult the act that applies to your product.

How long must the declaration be kept?

For 10 years from placing the product on the market. The manufacturer keeps the declaration together with the technical documentation, and the importer keeps a copy of the declaration and ensures access to the documentation (Art. 13 point 6 and Art. 16 point 6 of the act).


Legal status as of: 2 November 2026
Legal basis: Polish act of 13 April 2016 on conformity assessment systems and market surveillance (consolidated text: Dz.U. 2025 item 568; Art. 4 points 4 and 6, Art. 11, 13, 16, 88, 92, 93, 97); Regulation (EC) No 765/2008 (Art. 30 and Annex II; as amended by Regulation (EU) 2019/1020); Decision No 768/2008/EC (Art. R4, R6, R10, Annex III); Directive 2014/35/EU (Art. 6, 8, 10, 15, Annex IV); Directive 2009/48/EC (Art. 15, Annex III); Regulation (EU) 2019/1020 (Art. 4); Regulation (EU) 2023/988 (Art. 2(1)); Regulation (EU) 2023/1230 (Art. 54); Regulation (EU) 2025/2509 (Art. 59); European Commission page on CE marking. We did not check the declaration templates in the other sector acts (e.g. Directives 2014/30/EU, 2014/53/EU, 2011/65/EU), later amendments to the act after the consolidated text announced on 24 March 2025, the Blue Guide, or the rules for particular product categories. This text is not legal advice.
Last review: 2 November 2026

Need a declaration skeleton to fill in?

Module M5 "Declaration and marking" in the Tarcza (from 590 zł) and Premium packages includes an EU declaration of conformity template and a model statement for products without the CE mark. The template must be adapted to the legal acts that apply to your product, and responsibility for the content remains with you. Templates help organise documents but do not guarantee the outcome of an inspection.

See GPSRReady packages

Newsletter

Alerts about regulation and Allegro form changes - once in a while.