Skip to content
GPSR Basics

Declaration of Conformity vs CE Certificate

Author:

Declaration of conformity vs CE certificate are two different documents. See who issues each, when a certificate exists and what to ask a Chinese supplier for.

A supplier writes: "We have CE certificate". They send a PDF, and you cannot tell whether it is a declaration of conformity, a laboratory report or something else entirely. The question of declaration of conformity vs CE certificate comes up regularly among importers, because in everyday speech both words mean "a paper from the manufacturer". The law distinguishes them sharply. The difference decides what you can treat as proof of compliance and what is merely decoration on a listing.

This article sets the terms side by side: who issues each document, what it means, when it exists and what to ask a supplier in China for. The declaration itself, its fields and its layout are covered separately in CE Declaration of Conformity: Template.

Key points at a glance

  • The EU declaration of conformity is a statement by the manufacturer, made under its sole responsibility, that the product meets the requirements (Art. 4 point 6 of the Polish act on conformity assessment systems and market surveillance).
  • A certificate within the meaning of the act is a document issued by a notified body (Art. 4 point 4). Not every product has one, because not every product is assessed by such a body.
  • There is no central EU authority that issues certificates entitling you to use the CE mark. This is what the Your Europe portal says.
  • A certificate does not replace the declaration. When a notified body took part in the assessment, its details go into the declaration, and the manufacturer signs it anyway.
  • A document called a "CE Certificate" by a seller or intermediary is sometimes a "voluntary certificate", which has no meaning for the CE mark.

Declaration of conformity vs CE certificate: the short answer

A declaration of conformity is a document of the manufacturer. A certificate is a document of an external body, and only where the rules for the given product require its involvement. The act separates these roles explicitly: a positive result of an assessment carried out by a notified body is the basis for issuing a certificate (Art. 8(2)), while the declaration is drawn up and signed by the manufacturer, who thereby takes responsibility for compliance (Art. 11(4)).

What a declaration of conformity is

It is the manufacturer's final statement in the conformity assessment procedure. Beforehand, the manufacturer draws up the technical documentation and carries out the conformity assessment, then signs the declaration and affixes the CE mark (Art. 13 points 2-4 of the act). According to Decision 768/2008/EC, by the very act of drawing up the declaration the manufacturer assumes responsibility for the product's compliance (Art. R10(3)). The declaration contains, among other things, product identification, manufacturer details, a reference to the legal acts and standards, and a signature. The detailed layout is described in the article on the declaration template.

What a "CE certificate" can be

"CE certificate" is not a legal term. Suppliers send three different kinds of documents under this name.

1. A notified body certificate

This is a real certificate within the meaning of the act. It is issued by a notified body, i.e. an independent organisation authorised by an EU country to assess conformity where the rules require it. The European Commission keeps a public list of such bodies in the NANDO database, linked from the Commission page on notified bodies. If a body took part in the assessment, its four-digit number appears next to the CE mark and its details go into the declaration (the notified body field).

2. A laboratory test report

A laboratory tests the product and issues a report. It is useful evidence and part of the technical documentation (Decision 768/2008/EC lists test reports among its elements), but it is neither a declaration nor a certificate entitling you to the CE mark. The result applies to a specific sample and scope of testing.

3. A "voluntary certificate" from an intermediary

The Your Europe portal warns that some organisations offer "voluntary certificates" that are not valid for the purposes of CE marking. Such documents are not legally recognised and may be issued without testing the product, used outside the issuer's competence, and mislead customers and authorities. If a file from a supplier has an impressive stamp but names neither a legal act nor a model, it most likely belongs to this group.

Declaration of conformity vs CE certificate: comparison table

FeatureEU declaration of conformityNotified body certificateTest report
Who issues itThe manufacturer (or its authorised representative)A notified bodyA laboratory
What it statesThat the product meets the requirements, on the manufacturer's responsibilityThat the product, its design or process complies with the requirements (Art. 4 point 4 of the act)Results of testing a sample within a defined scope
Does it always existYes, for products bearing the CE markNo, only where the rules require a notified bodyNot required as such, but often serves as evidence
Does it replace the othersDoes not replace a certificate where one is requiredDoes not replace the declarationDoes not replace either of them

When a certificate exists at all

It depends on the legal act and on the route chosen by the manufacturer. A few examples from the texts of the directives:

  • Low voltage electrical equipment. Directive 2014/35/EU bases the assessment on module A, i.e. internal production control, without a notified body (Art. 15(2) and Annex III). A certificate will usually not exist.
  • Toys. Where the manufacturer applied harmonised standards covering all the requirements, module A is enough. In other situations, for example when there are no such standards or the manufacturer applied them only in part, type examination by a notified body is needed (Art. 19 of Directive 2009/48/EC).
  • Radio equipment. If the manufacturer did not apply harmonised standards or applied them in part, it must choose a route with type examination or full quality assurance (Art. 17(4) of Directive 2014/53/EU), i.e. with a notified body involved.
  • Machinery, medical devices, construction products. Your Europe lists them among products for which third-party assessment is usually necessary.

The conclusion: the lack of a notified body certificate does not mean a defect in the product if the rules do not require one for it. Conversely, a certificate without a declaration does not make a product compliant.

What to ask a supplier in China for

Instead of asking for a "CE certificate", ask for a set that can be verified:

  1. An EU declaration of conformity with the full layout: model, manufacturer, legal acts, standards, date, signature with name and position.
  2. Information on whether a notified body took part in the assessment and, if so, its name, number and certificate number.
  3. Test reports for exactly this model, with the laboratory name and date.
  4. Photos of the CE mark on the product and packaging and of the manufacturer details.
  5. Confirmation of who the manufacturer is and who is only a trading intermediary.

How to verify the documents before ordering is described in Importing From China: How to Check CE, and what "certificates" from China mean in the context of GPSR is covered in Chinese Certificates and GPSR.

How this relates to GPSR and your Allegro listing

Regulation 2023/988 does not require a declaration of conformity as such. It requires the manufacturer to prepare technical documentation with a risk assessment, and the importer to ensure the manufacturer has done so and to keep a copy for 10 years (Art. 9(2), Art. 11(1) and (6)). For products covered by harmonisation legislation, GPSR supplements it only as regards risks that this legislation does not cover (Art. 2(1)). In practice the declaration and reports go into your technical documentation as evidence. What that documentation contains is explained in GPSR Technical Documentation - What It Contains, and the relationship between the two regimes in GPSR vs CE - What Is the Difference. We did not check Allegro's current requirements on attaching documents to a listing.

Frequently asked questions

Does a CE certificate replace a declaration of conformity?

No. A certificate, if it exists at all, is issued by a notified body. The declaration is always signed by the manufacturer, and the details of the body and the certificate are entered into it in the relevant field.

Who issues the CE certificate?

Nobody, because a "CE certificate" is not a document issued by a central authority. According to Your Europe, there is no EU body that issues permits or certificates entitling you to use the CE mark. The manufacturer affixes the mark itself after carrying out the assessment, and a notified body issues a certificate only where the rules require its involvement.

My supplier only has a laboratory report. Is that enough?

A report is evidence, but it does not replace a declaration of conformity or technical documentation. Check whether it covers your model, what scope of testing it has, and whether the manufacturer issued a declaration naming the right acts and standards.

Does every product with CE have a certificate?

No. For many categories the manufacturer can assess conformity on its own. There is then no notified body certificate, and the CE mark is still correct if the documentation and declaration exist.

What should I do if the supplier sends a "certificate" without a declaration?

Ask for the declaration and the documentation for that model. Until you have the documents, do not place the product on the market: an importer should not do so when it has reason to believe the product is not compliant (Art. 16 point 3 of the act).


Legal status as of: 2 November 2026
Legal basis: Polish act of 13 April 2016 on conformity assessment systems and market surveillance (consolidated text: Dz.U. 2025 item 568; Art. 4 points 4 and 6, Art. 8(2), Art. 11(4), Art. 13 points 2-4, Art. 16 point 3); Decision No 768/2008/EC (Art. R10, Annex II module A); Directive 2014/35/EU (Art. 15, Annex III); Directive 2009/48/EC (Art. 19); Directive 2014/53/EU (Art. 17); Regulation (EU) 2023/988 (Art. 2(1), Art. 9(2), Art. 11(1) and (6)); European Commission and Your Europe pages on CE marking and notified bodies. We did not check the conformity assessment procedures in the other sector acts (including for machinery, medical devices and construction products), the Blue Guide, the content of the NANDO database for specific bodies, or Allegro's requirements on documents in listings. This text is not legal advice.
Last review: 2 November 2026

Have papers from your supplier and want to put them in order?

Module M6 "Manufacturer identification" and module M5 "Declaration and marking" help you collect the manufacturer's details and prepare a declaration to which you attach the supplier's materials. M5 is included in the Tarcza (from 590 zł) and Premium packages. Templates do not replace verifying the supplier's documents and do not guarantee the outcome of an inspection.

See GPSRReady packages

Newsletter

Alerts about regulation and Allegro form changes - once in a while.